Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Notifier Notifier FST-851 Intelligent Thermal Detector view 1
Notifier Notifier FST-851 Intelligent Thermal Detector view 2Notifier Notifier FST-851 Intelligent Thermal Detector view 3Notifier Notifier FST-851 Intelligent Thermal Detector view 4

Notifier FST-851 Intelligent Thermal Detector

Notifier
$9.96
In stock — 20 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandNotifier
SKUFST-851
TypeHeat Detectors
Variants1

NOTIFIER FST-851 — an intelligent plug-in thermal (heat) detector with FlashScan, providing 135°F (57°C) fixed-temperature detection. It must be mounted to a separate base, ordered separately.

The FST-851(A) Series uses an innovative thermistor sensing circuit for fast response in a low-profile package, and integral communications give it features that surpass conventional detectors. Point ID capability allows each detector’s address to be set with rotary decimal address switches, providing exact detector locations. Two bi-color LEDs give a 360° field viewing angle — blinking green in normal condition and turning steady red in alarm. Thermal detectors are used for the protection of property rather than life safety, which makes them the right choice in areas where smoke detection would be prone to nuisance alarms. The detector plugs into a separate base that carries the SEMS-screw field wiring, and the same base accepts photoelectric, ionization and thermal sensors interchangeably. FST-851(A) Series detectors are compatible with NOTIFIER ONYX and CLIP series fire alarm control panels.

Specifications

Type Intelligent plug-in thermal (heat) detector, fixed temperature
Thermal rating Factory preset fixed-temperature setpoint 135°F (57°C)
Protocol Compatible with FlashScan and CLIP protocol systems
Addressing Rotary, decimal addressing — 1–99 on CLIP systems, 1–159 on FlashScan systems
SLC connection Two-wire
Voltage range 15 – 32 volts DC peak
Standby current (max. avg.) 300 µA @ 24 VDC (one communication every 5 seconds with LED enabled)
LED current (max.) 6.5 mA @ 24 VDC (“ON”)
Operating temperature range FST-851(A) Series: -20°C to 38°C (-4°F to 100°F)
Relative humidity 10% – 93% non-condensing
Detector spacing UL approved for 50 ft. (15.24 m) center to center; FM approved for 25 x 25 ft. (7.62 x 7.62 m) spacing
Size 2.1 in. (5.3 cm) high; base determines diameter — B210LP(A) 6.1 in. (15.5 cm), B501(A) 4.1 in. (10.4 cm), B200S(A)/B200SR(A) 6.875 in. (17.46 cm), B224RB(A)/B224BI(A) 6.2 in. (15.748 cm)
Shipping weight 4.8 oz. (137 g)
Construction Off-white fire-resistant plastic; 94-5V plastic flammability rating
Agency certifications UL S747; ULC S6978; MEA 383-02-E; FM Approved; CSFM 7270-0028:0196; BSMI CI313066760025; CCCF Certif. # 2004081801000018; U.S. Coast Guard 161.002/42/1 and 161.002/50/0; Lloyd’s Register 11/600013
Country of origin Made in the U.S.A.

Installation notes

  • Fixed temperature only: the plain FST-851 is the 135°F (57°C) fixed-temperature model. Rate-of-rise detection at 15°F (8.3°C) per minute is the FST-851R, and 190°F (88°C) high-temperature detection is the FST-851H — do not substitute one for another on a submittal.
  • Base sold separately: the detector must be mounted to one of the intelligent bases. Mount the base on an electrical backbox at least 1.5 in. (3.81 cm) deep; for a chart of compatible junction boxes see DN-60054.
  • No end-of-line resistor: because of the supervision inherent in the SLC loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class B) wiring.
  • Isolator limits: when using relay or sounder bases, consult the ISO-X(A) installation sheet I56-1380 for device limitations between isolator modules and isolator bases. The B224BI(A) isolator base allows a maximum of 25 devices between isolator bases.
  • Marine certifications exclude one base: the U.S. Coast Guard 161.002/50/0 and Lloyd’s Register 11/600013 listings for NFS2-640/NFS-320/NFS-320C exclude the B210LP(A) base.
  • High-ceiling maintenance: the XR2B removal tool with XP-4 extension poles allows detector heads to be installed or removed without a ladder. Functional testing uses the M02-04-00 test magnet or the M02-09-00 telescoping version.

Related models

  • FST-851A — same detector with ULC certification (the “A” suffix indicates the ULC certified model).
  • FST-851R / FST-851RA — intelligent thermal detector adding the rate-of-rise feature, 15°F (8.3°C) per minute.
  • FST-851H / FST-851HA — intelligent high-temperature thermal detector fixed at 190°F (88°C), with a wider operating range of -20°C to 66°C (-4°F to 150°F).
  • FST-951 Series — the later generation of NOTIFIER intelligent heat detector, covered by its own data sheet; it is a different product from the FST-851 Series and uses the newer base range.
  • B210LP(A) / B501(A) / B200S(A) / B200SR(A) / B224RB(A) / B224BI(A) — standard flanged, flangeless, sounder, retrofit sounder, relay and isolator bases.
  • RA100Z(A) — remote LED annunciator, 3–32 VDC, supported by B210LP(A) and B501(A) bases only.

Specifications taken from the NOTIFIER data sheet “FST-851(A) Series Intelligent Thermal (Heat) Detectors with FlashScan,” document DN-6936:B (12/07/2011). Manufacturer specifications are subject to change without notice.

Documents

FAQ

Is the FST-851 discontinued?
Yes. Its replacement is the NOTIFIER FST-951-IV, and NOTIFIER describes the FST-951 Series as direct replacements for the FST-851 Series.

Is a base included?
No. The detector mounts to a separate intelligent base such as the B210LP, B501, B200S, B224RB or B224BI, ordered separately.

Which panels is it compatible with?
NOTIFIER ONYX and CLIP series fire alarm control panels, in FlashScan or CLIP protocol.

What spacing applies?
UL approved for 50 ft (15.24 m) center to center; FM approved for 25 x 25 ft (7.62 x 7.62 m).

Questions about this product

Is Notifier FST-851 Intelligent Thermal Detector in stock?

Yes — 20 units are available and ready to ship from our US warehouse.

How fast will Notifier FST-851 Intelligent Thermal Detector ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Notifier FST-851 Intelligent Thermal Detector ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping