Mircom UDACT-300A Digital Alarm Communicator Transmitter Dialer Module
| Brand | Mircom |
|---|---|
| SKU | UDACT-300A |
| Type | Modules |
| Variants | 1 |
The Mircom UDACT-300A lets a Mircom panel report to a central station over two telephone lines. This digital alarm communicator transmitter/dialer module allows FA-1000 Series, FX-2000 and FleX-Net Series fire alarm control panels to transmit alarm, supervisory and trouble information to a monitoring facility. It mounts in a dedicated location in the panel's main chassis and takes its power from the host panel.
Key Features
- Dual telephone line operation with line supervision at roughly one-minute intervals
- Reports in Ademco Contact ID and SIA-DCS formats
- DACT mode sends common events; UDACT mode sends point-specific alarm, supervisory, waterflow and trouble data
- ZDACT feature groups FX-2000/FleX-Net input circuits into software zones for reporting
- Programmed on site with the CFG-300 tool or UIMA, or remotely by modem (passcode protected)
- 500-entry event logs, reviewable locally or remotely
Specifications
- Manufacturer: Mircom
- Part Number: UDACT-300A
- Panel Interface: RS-485 data link
- Telephone Lines: 2
- Reporting Formats: Ademco Contact ID, SIA-DCS
- Current Consumption: Standby 40 mA; Alarm 60 mA
- Power: Supplied by host fire alarm control panel
Compatibility
For Mircom FA-1000 Series, FX-2000 and FleX-Net Series fire alarm control panels. The CFG-300 Configuration Tool is needed for on-site programming.
Documents
- UDACT-300A Digital Alarm Communicator/Dialer Module — Data Sheet CAT-5345 (PDF)
- UDACT-300A Installation and Operation Manual LT-888 (PDF)
FAQ
Which panels does the UDACT-300A work with?
Mircom FA-1000, FX-2000 and FleX-Net Series fire alarm control panels, which power it and talk to it over an RS-485 data link.
Which reporting formats does it use?
Ademco Contact ID and SIA-DCS, over two telephone lines.
What is the difference between DACT and UDACT mode?
DACT mode reports common alarm, supervisory, waterflow and trouble information; UDACT mode reports point-specific information. The ZDACT feature groups FX-2000 or FleX-Net inputs into software zones for reporting.
How is it programmed?
Locally with the on-board keypad and the CFG-300 configuration tool, with a UIMA programming tool and a computer, or remotely from a PC with a modem.
Questions about this product
Is Mircom UDACT-300A Digital Alarm Communicator Transmitter Dialer Module in stock?
Yes — 35 units are available and ready to ship from our US warehouse.
How fast will Mircom UDACT-300A Digital Alarm Communicator Transmitter Dialer Module ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
Where does Mircom UDACT-300A Digital Alarm Communicator Transmitter Dialer Module ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.