Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Kidde Kidde KI-RB KI Series Detector Mounting Base view 1

Kidde KI-RB KI Series Detector Mounting Base

Kidde
$4.46
In stock — 26 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandKidde
SKUKI-RB
TypeBases
Variants1

Kidde KI-RB — relay detector mounting base for Kidde KI Series intelligent detectors.

The KI-RB includes a relay whose dry contact is set for normally open or normally closed operation during installation. The relay position is supervised so it cannot be jarred out of position unnoticed, and the base can be operated as a control relay when programmed to do so at the control panel. Wiring terminals are reachable from the room side after the base is mounted to the electrical box.

Specifications

Model KI-RB
Type Relay detector base
Contact rating 1.0 A at 30 VDC (pilot duty)
Contact operation Normally open or normally closed, selected at installation
Electrical boxes North American 1-gang; 3-1/2 in. or 4 in. octagon, 1-1/2 in. deep; European BESA and 1-gang with 60.3 mm fixing centers
Wire sizes 18 to 12 AWG (16 and 18 AWG preferred)
Line resistance 10 ohms maximum per wire
Remote LED Not supported

Installation notes

  • Terminals: 1 normally open, 2 data in/out (+), 3 common, 4 data in (-), 6 normally closed, 7 data out (-)
  • For a 4 in. square box, use the KI-RB4, which includes the GSA-TS4 trim skirt
  • The GSA-LED remote LED connects only to the KI-SB or KI-SB4 standard base

Related models

  • KI-RB4: 4 in. relay base with trim skirt
  • KI-SB / KI-SB4: standard detector bases
  • KI-IB / KI-IB4: fault isolator bases

Documents

FAQ

What is the relay contact rating?
The dry contact is rated 1.0 A at 30 VDC, pilot duty. Normally open or normally closed operation is selected during installation.

Can the relay be controlled by the panel?
Yes. The KI-RB can be operated as a control relay if it is programmed to do so at the control panel.

Does the KI-RB support a remote LED?
No. The GSA-LED remote LED works only with the KI-SB or KI-SB4 standard base.

Will it fit a 4 in. square box?
The KI-RB fits 1-gang and 3-1/2 or 4 in. octagon boxes. For a 4 in. square box, use the KI-RB4, which comes with the GSA-TS4 trim skirt.

Questions about this product

Is Kidde KI-RB KI Series Detector Mounting Base in stock?

Yes — 26 units are available and ready to ship from our US warehouse.

How fast will Kidde KI-RB KI Series Detector Mounting Base ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Kidde KI-RB KI Series Detector Mounting Base ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping