Kidde FX-IDC1A Class A Single Input Module
| Brand | Kidde |
|---|---|
| SKU | FX-IDC1A |
| Type | Modules |
| Variants | 1 |
Kidde FX-IDC1A — analog addressable single-input module wired for a Class A initiating device circuit.
It brings one normally open dry-contact initiating device, such as a waterflow or tamper switch, onto a Kidde FX addressable loop. One address is set on two rotary switches, TENS 0 to 12 and ONES 0 to 9, and slide switch P1 presets the module as alarm latching (factory default) or supervisory. A bicolor LED flashes green in normal, red in alarm.
- One device address per module; Class A initiating device circuit
- Current draw 400 µA standby, 500 µA active
- Communication line voltage maximum 20.6 V peak to peak
- IDC maximum circuit resistance 50 Ω (25 Ω per wire), capacitance 0.1 µF
- Wiring 12 to 18 AWG; ground fault impedance 10 kΩ
- 32 to 120°F (0 to 49°C), 0 to 93% RH noncondensing
- Fits a 4 in. square two-gang box, 2-1/2 in. or 1-1/2 in. deep
The A is the wiring class, not a revision. FX-IDC1B is the Class B single-input mini module and FX-IDC2B the Class B two-input module; neither substitutes. Kidde specifies no end-of-line resistor here, because the Class A circuit returns to the module for supervision. It will not support conventional two-wire smoke detectors.
Questions about this product
Is Kidde FX-IDC1A Class A Single Input Module in stock?
Yes — 47 units are available and ready to ship from our US warehouse.
How fast will Kidde FX-IDC1A Class A Single Input Module ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
Where does Kidde FX-IDC1A Class A Single Input Module ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.