










D-MAK17
| Brand | Rockville |
|---|---|
| SKU | D-MAK17 |
| Type | Marine and Powersports~Marine~Installation & Accessories~Marine Amp Kits |
| Variants | 1 |
Run power and ground to two marine amplifiers with tinned oxygen-free copper wiring and a combined distribution block. The Rockville D-MAK17 uses 0 AWG battery wiring and separate 4 AWG runs to each amplifier, keeping the main feed and amplifier connections organized in one installation.
The tinned OFC conductors and flexible marine-grade PVC jackets are designed for moisture-exposed environments. Mesh split loom covers the power and ground cables, while included rubber grommets help protect wiring where it passes through openings.
Pre-installed terminals, ferrules and heat shrink reduce preparation work. The battery-side wiring includes a 2-foot red cable for the battery-to-fuse-holder connection, a customizable 10-foot red cable to the distribution block, and a customizable 12-foot black ground cable. Two red and two black 5-foot cables connect the block to your amplifiers.
The combined block accepts 0 AWG power and ground inputs and provides dual 4 AWG outputs, with fused power distribution. A 20-foot 16 AWG remote wire, assorted fuses and extra termination hardware let you tailor the wiring to your layout. Speaker wire and RCA cables are not included.
Specifications
- Application: power, ground and remote wiring for two marine amplifiers
- Conductor material: 100% tinned oxygen-free copper (OFC)
- Main power and ground wiring: true 0 AWG; red power and black ground
- 0 AWG cable outer diameter: 15.5 mm
- 0 AWG conductor construction: 4,753 strands of 0.12 mm wire
- Listed 0 AWG cable maximum load: 370A at 20 feet; this is a cable specification, not a fuse recommendation
- Jacket: heavy-duty, flexible marine-grade PVC
- Amplifier power and ground wiring: 4 AWG, two 5-foot red runs and two 5-foot black runs
- Remote turn-on wire: 20 feet, 16 AWG tinned OFC
- Distribution block: combined power and ground chassis, 0 AWG inputs and dual 4 AWG outputs with fused power distribution
In the Box
- One 2-foot red 0 AWG power cable with ring terminal and washer at one end, crimped ferrule at the other, heat shrink at both ends and mesh split loom
- One 10-foot red 0 AWG power cable with mesh split loom and a ferrule and heat shrink at one end; length can be customized
- One 12-foot black 0 AWG ground cable with mesh split loom, ferrule and heat shrink at one end, and ring terminal and washer at the other; length can be customized
- One combined fused power and ground distribution block
- Two 5-foot red 4 AWG power cables and two 5-foot black 4 AWG ground cables, with pre-installed ferrules, heat shrink and mesh split loom
- One 20-foot 16 AWG remote wire with a pre-installed crimped ferrule and heat shrink, plus one butt connector, one fork terminal and two pieces of 16 AWG heat shrink
- Additional ferrules: two red 0 AWG, one black 0 AWG and six red 4 AWG with heat shrink; extra heat shrink for the supplied wire gauges
- Mini ANL fuses: two each of 30A, 40A, 50A, 60A, 70A, 80A, 100A and 120A
- ANL fuses: two each of 150A, 200A, 250A and 300A
- 4 AWG fork terminals: three red and three black
- Rubber grommets: four for 4 AWG cables and four for 0 AWG cables
- Sixteen clear 6-inch zip ties
- Nickel-plated, corrosion-resistant mounting screws for the distribution block and fuse holder
Questions about this product
Is D-MAK17 in stock?
Yes — 11 units are available and ready to ship from our US warehouse.
How fast will D-MAK17 ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
Where does D-MAK17 ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.